Zoom MS-200D+

Specs
Maximum number of simultaneous effects
 
2 effects
User patch memories
 
250
Sampling frequency
 
44.1 kHz
A/D conversion
 
24-bit 128× oversampling
D/A conversion
 
24-bit 128× oversampling
Signal processing
 
32-bit
Frequency response
 
20 Hz – 20 kHz (+0.5 dB/−0.5 dB) (when 10kΩ load)
Display
 
160 × 128 dot-matrix LCD
Input
INPUT
Standard mono phone jack
 
 
Rated input level: −20 dBu
 
 
Input impedance (line): 470 kΩ
Outputs
L/R
Standard mono phone jacks
 
 
Maximum output level: +7.2 dBu (when output impedance 10 kΩ or higher)
Input S/N
 
122 dB
Noise floor (residual noise)
L/R
–100 dBu
Power
AC adapter
9V DC 500mA center negative (ZOOM AD-16)
 
2 AA batteries
Alkaline, Lithium or rechargeable NiMH batteries
 
 
• USB bus power is supported.
Estimated operation times using batteries
Alkaline batteries
About 7 hours
 
NiMH batteries (1900 mAh)
About 6.5 hours
 
Lithium batteries
About 14 hours
 
 
• These values are approximate. • Battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions.
USB
Port
USB 2.0 Type-C
 
Supported cable type
Type-C
 
Handy Guitar Lab
USB1.1 Full Speed
 
 
• Use a USB cable that supports data transfer.
Dimensions
 
133 mm (D) × 79 mm (W) × 61 mm (H)
Weight
 
346 g (excluding batteries) 393 g (including batteries)
 
 
 
Note: 0 dBu = 0.775 V