RODE

The ZP2 is a large, durable padded zip pouch designed to protect your RØDE microphone from environmental contaminants during storage

The ZP1 is a durable, padded zip pouch designed to protect your RØDE microphone from environmental contaminants during storage.

The XLR-3 and XLR-6 are premium XLR cables ideal for use with a wide range of audio equipment. They feature a professional-grade Canare™ cable and high-quality Neutrik® connectors, ensuring incredibly clean signal transfer with extremely low noise. Available in two lengths – 3m (10ft) and 6m (20ft) – and a range of different colours, including orange, purple, green, blue, red, pink and black, these cables are perfect for use with RØDE products that feature colour-coded inputs, such as the RØDECaster Pro II, or any product with an XLR connection.

The XLR-3 and XLR-6 are premium XLR cables ideal for use with a wide range of audio equipment. They feature a professional-grade Canare™ cable and high-quality Neutrik® connectors, ensuring incredibly clean signal transfer with extremely low noise. Available in two lengths – 3m (10ft) and 6m (20ft) – and a range of different colours, including orange, purple, green, blue, red, pink and black, these cables are perfect for use with RØDE products that feature colour-coded inputs, such as the RØDECaster Pro II, or any product with an XLR connection.

The XLR-ID is a set of eight colour-coded rings that can be affixed to any XLR plug to assist with cable identification. The colours of the rings match the colours used for each of the microphone channels on the RØDECaster Pro.

The WS-LAV is a high-quality foam windshield that is designed to fit the Lavalier, Lavalier GO and RØDELink LAV microphones. It helps prevent wind noise and hard plosive sounds overloading the microphone capsule. The WS-LAV is supplied in a pack of three. Note the WS-LAV is not compatible with the Lavalier ME.

The WS-HS1 is a high-quality foam windshield that is designed to fit the HS1 and HS2 headset microphones. It helps prevent wind noise and hard plosive sounds overloading the microphone capsule. The WS-HS1 is supplied in a pack of three, and is available in black or pink.

WS-Chroma is a set of two foam windshields for the VideoMic NTG coloured blue and green, making them suitable for chroma keying. The coloured foam enables the microphone to be placed in the frame and closer to the talent for optimal sound quality. Chroma key compositing can then be used to remove the microphone from the image.

The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me. Featuring open-cell foam covered by synthetic fur, it is designed to minimise wind noise when recording outdoors.

The WS8 is a high-performance windshield that can be used with any RØDE small-diaphragm condenser microphone (or 'pencil mic'). Designed for use in windy recording environments, the WS8 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area.

The WS7 is a high-performance windshield for the RØDE NTG3 and other compatible shotgunmicrophones. Designed for use in windy recording environments, the WS7 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area.

The WS6 is a high-performance windshield for shotgun microphones. Designed for use in windy recording environments, the WS6 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area. Suitable for the RØDE NTG1, NTG2, NTG4 and NTG4+ as well as any shotgun microphone with a maximum slot length of 160.5mm and a diameter of 21-22.5mm.

The WS5 is a high-quality foam pop filter that is designed to fit any RØDE small-diaphragm condenser microphone ('pencil mic'). It helps prevent wind noise and any hard plosive sounds overloading the microphone capsule.

The WS4 is a high-quality foam windshield that is designed to fit the RØDE NT4 stereo microphone. It helps prevent wind noise and any hard plosive sounds overloading the microphone capsule.

The WS3 is a high-quality foam windshield that is designed to fit the RØDE NT3 microphone. It helps prevent wind noise and prevents any hard plosive sounds overloading the microphone capsule.

The WS2 is a high-quality foam windshield that is designed to fit any RØDE broadcast-style or large-diaphragm microphone, including the NT1-A, NT2-A, NT1000, NT2000, NTK, K2 and Broadcaster microphones. It helps prevent hard plosive sounds overloading the microphone capsule.

The WS14 is a deluxe pop filter purpose-built to minimise plosives when used in conjunction with your PodMic or PodMic USB, helping you capture crystal-clear audio for your content. It features a low-profile design to remain discreet on camera and is constructed from high-density foam with supporting ribs to ensure it maintains its shape. Available in a range of colours, including orange, purple, green, blue, red, pink, black and white.

The WS12 is a professional-grade windshield for the RØDE VideoMic GO II microphone. Featuring open cell foam covered by synthetic fur, it is designed to minimise wind noise and plosives when recording. Includes a wind seal made of synthetic rubber to block any unused sockets (USB-C or 3.5mm) on the microphone, preventing wind entering the rear of the microphone.

The WS11 is an easy-to-use high-performance windshield for the VideoMic NTG. Designed to for use in windy recording environments, the WS11 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber grip system prevents any wind noise from entering the rear of the microphone pickup area.

The Wireless Micro is a pocket-sized solution for capturing pristine audio with your smartphone. It connects directly to your phone with no cables required and features two clip-on transmitters with in-built microphones, so you can get recording in seconds. Intelligent GainAssist technology will ensure your audio is perfect in any environment and with up to 21 hours of battery life using the included charging case, it is the ideal grab-and-go microphone for smartphone content creation.

The Wireless Micro is a pocket-sized solution for capturing pristine audio with your smartphone. It connects directly to your phone with no cables required and features two clip-on transmitters with in-built microphones, so you can get recording in seconds. Intelligent GainAssist technology will ensure your audio is perfect in any environment and with up to 21 hours of battery life using the included charging case, it is the ideal grab-and-go microphone for smartphone content creation.

The Wireless ME TX is an ultra-compact wireless transmitter that makes recording professional audio for your videos effortless – perfect for expanding a RØDE Series IV wireless system. It features both a 3.5mm TRS input for connecting external microphones like lavaliers or VideoMics, along with a built-in omnidirectional mic, and thanks to the intelligent GainAssist technology, you can simply clip it onto your subject and start recording crystal-clear wireless audio in seconds. Note: This product requires a RØDE Series IV RX (receiver) to operate, such as the Wireless ME, Wireless GO II, Wireless PRO, RØDECaster Pro II, RØDECaster Duo or Streamer X.

The Wireless ME is an ultra-compact wireless microphone system that makes recording professional audio for your videos effortless. Featuring the same iconic, pocket-sized form factor as the original Wireless GO and Wireless GO II, with innovative features like GainAssist, a high-quality microphone built into both transmitters and receiver, complete compatibility with cameras, computers and smartphones, the Wireless ME is the perfect wireless companion for content creation, interviewing, reporting, presenting, filmmaking and much more.

The RØDE VXLR Pro is a female TRS mini-jack to male XLR adaptor for connecting RØDE microphones with a 3.5mm output to devices with an XLR input. It utilises an internal transformer to convert an unbalanced signal to a balanced signal, making it ideal for connecting a microphone with an unbalanced output to mixer or interface. Premium componentry ensures extremely low noise when a long cable run is necessary. The VXLR Pro also converts 12-48V phantom power to 4V plug-in power, allowing microphones such as the VideoMicro and VideoMic GO to receive power from XLR devices and it features a locking connector that will ensure your connection is always secure when recording.

The VXLR+ is a 3.5mm female TRS to male XLR adaptor, which will convert 12-48V phantom power down to 3-5V plug-in power, allowing RØDE on-camera microphones such as the VideoMicro and VideoMic GO, as well as self-worn microphones like the HS2, to receive power from an XLR input. It also features a locking connector for added security.

The VXLR is a female 3.5mm TRS mini-jack to male XLR adaptor for connecting microphones with a 3.5mm output to a recording device with XLR inputs. It is not compatible with microphones that require phantom or plug-in power, such as the VideoMicro.

The VideoMic Pro+ is a premium on-camera microphone for capturing broadcast-grade audio in a wide range of filmmaking scenarios. With an expansive feature set and superior sound quality, it is the go-to microphone for countless content creators, offering the ultimate in performance and versatility.

The VideoMic Me-C+ is a high-quality microphone for Android and iOS mobile devices with a USB-C port, designed to provide incredible audio when shooting video. The microphone’s directionality reduces surrounding noises to focus on exactly what you are filming, making sure your videos sound clear and intelligible, and the 3.5mm jack provides a headphone output for audio monitoring and playback. Not compatible with iOS devices with a Lightning port

The VideoMic Me is a high-quality microphone for mobile devices with a 3.5mm headphone input, designed to give you incredible audio when shooting video. The microphone's directionality reduces surrounding noises and focuses on what you're filming, ensuring your videos sound clear and intelligible. The 3.5mm jack provides a headphone output for audio monitoring and playback. The VideoMic Me comes with a clip to ensure the mic is secure and a furry windshield for filming outdoors in adverse weather conditions.

The iOS Vlogger Kit contains everything you need to get professional results when filming using your iPhone. The VideoMic Me-L microphone connects directly to your device, delivering crisp, clear, directional sound for any application. The SmartGrip secures your device firmly in place for stable recording and connects seamlessly to the Tripod 2 for either handheld or tabletop use, while the MicroLED ensures all your shots are perfectly lit. The Vlogger Kit comes with a mic clip to ensure the mic is secure and a furry windshield suitable for filming in outdoor and adverse weather conditions. The VideoMic Me-L is compatible with all Apple iOS devices with a Lightning port and running iOS 11 or higher.